Gorisek Bros Hills - Bug Reports

[Oyster]

Sapporo HS250 is totally broken - I can't jump +200m from gate 29.

find a good wind - I already jumped 246m there

[mask]

[kumy246]

its not actually a bug but if you play with slightly different camera than neutral camera that you get in the begginning, the tower in planica hs240 taking the view of ski jumper during flight so if there is any possibility to remove the tower or flip it on the left side so i can play normaly on it
https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD4668A

https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD563BF
https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD64E3C

[BartiSkiJumper]

its not actually a bug but if you play with slightly different camera than neutral camera that you get in the begginning, the tower in planica hs240 taking the view of ski jumper during flight so if there is any possibility to remove the tower or flip it on the left side so i can play normaly on it
https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD4668A

https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD563BF
https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD64E3C

366-562 lines in xml file is a model of this TV Tower - You can delete it if it bothers you

[kumy246]

its not actually a bug but if you play with slightly different camera than neutral camera that you get in the begginning, the tower in planica hs240 taking the view of ski jumper during flight so if there is any possibility to remove the tower or flip it on the left side so i can play normaly on it
https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD4668A

https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD563BF
https://scontent-mxp1-1.xx.fbcdn.net/v/ ... e=5FD64E3C

366-562 lines in xml file is a model of this TV Tower - You can delete it if it bothers you

But how can i delete it im quite bad in the computer things

[kumy246]

And bad mitterndorf is pretty much same problem but in this case judge tower. For planica i sonehow managed to delete the t9wer but cannot delete this at bad mitterndorf

[Hajamoto]

I can't change textures of the fence:

Code: Select all

<fence t="Textures\wood1.png" m="Materials\wood.xml" c="0xeeeeee" h="2"/>

This code does not affect anything except the height parameter which works fine.
Did I make something wrong or the parameter does not work properly?

[mask]

You can only change back side of the fence. Front side with mediamond logo will stay.

[Hajamoto]

You can only change back side of the fence. Front side with mediamond logo will stay.

It seems that the backside is still the same even after the change.

EDIT: It works fine with wood2b.png.

[Maciejo-96]

Sapporo HS250 is totally broken - I can't jump +200m from gate 29.

It is very technical hill, almost without any margin of error With good takeoff and stable enough flight over the knoll you could jump over 260 meters

[Przemek1986]

I noticed that if you choose any of the new custom hills for a competition and you jump against CPU jumpers, they all jump 0.0m and receive 0 points which means that you literally already won before you even jumped. The original DSJ4 hills don't have that problem.

[Xinitiao]

@up it's beacuse 3rd party hills don't support cpu jumpers right now. In DSJ4 cpu are generated from online statistics, and new hills aren't available online too.

[Przemek1986]

@up it's beacuse 3rd party hills don't support cpu jumpers right now. In DSJ4 cpu are generated from online statistics, and new hills aren't available online too.

Oh, that's why. That's fine then. I'll survive

[teppis]

Hill filter on dsj24.pl still doesn't work.

[BartiSkiJumper]

Hill filter on dsj24.pl still doesn't work.

DSJ24.pl is still on static version, it will work when we allow everyone to upload their hills.